|
Product Details:
Payment & Shipping Terms:
|
| Display: | LCD | Accuracy Class: | 0.1, 0.2 |
|---|---|---|---|
| Test Functions: | Error, Power, Energy, Dial Test.... | Application: | Lab Or Worksite |
| Voltage Range: | Up To 300V | Current Range: | Up To 100A |
| Highlight: | Worksite Portable Meter Test Equipment,0.1 Portable Meter Test Equipment,10mA test meter calibration |
||
Single Phase Portable Meter Calibrator (integrated with phantom load generator) MCSS1.1
1) LCD display
2) Accuracy class: 0.1 (direct mode); 0.2 (clamp mode)
3) Measuring range: upto 300V /100A (direct mode)
4) Power and Energy test, Demand test, Error test, Dial test, Start, Creep test
5) Support RS232 communication with PC to upload the test data
Technical Index
| Accuracy Class | |
| Direct current mode | 0.1 |
| Clamp-on CT mode | 0.2 |
| Clamp-on CT range | |
| Optional | 10…..300A…more (optional) |
| Standard meter measure range | |
| Current | 10mA-100A |
| Voltage | 1-300V |
| Resolution | Six digits valid value |
| Power source | |
| Output voltage range/resolution | 1-288V / better than 0.01% |
| Output current range/resolution | 10mA-120A / better than 0.01% |
| Output power | Maximum 100VA (current circuit) & 50VA (voltage circuit) |
| Output stability | ≤0.05% /120s (voltage,current,power) |
| Waveform distortion | ≤0.5% |
| Frequency range & resolution | 45-65HZ & 0.01HZ |
| Phase angle range & adjust resolution | 0-360 o / 0.01° |
| Other parameters | |
| Power supply |
AC 220V±10%,50/60HZ |
| Power consumption | Max 200VA |
| Size & Weight | 361*236*163mm & 7kg |
Features
1. Standard meter integrated with voltage and current source
2. 7” touch screen LCD; In-built ARM system
3. Output with high stability and low distortion
4. There are 2 working mode:
1) Single phase standard meter
2) Meter tester with phantom load source
5. It has protection: open circuit, short circuit, over load, and etc
6. It can do below testing: start, creep, basic error, standard deviation, dial test, etc..
7. Can do voltage dip and interrupt test
8. 2-21 times harmonic; can set amplitude and phase; and do harmonic analyze and get waveform
9. With self-test function namely can perform monitoring of output voltage, output current, output phase,
power factor, output frequency, output harmonic waveform and power output stability and etc
Contact Person: Mr. Tony Han
Tel: 86-15237157117
Fax: 86-371-55692730
